Sabre 27
- Barco REF# · 155143
- Eslora total · 8.23m
- Año · 1970
- Construcción · Fibra
- Perfíl de carena · Orza
- Camas · 6
- Motor · 1 x gasoil 20cv, Volvo Penta MD2B ()
- Lugar · Falmouth
Este barco está fuera del mercado Aqui hay algunas embarcaciones que siguen en venta
Detalles suplementarios
| Diseñador | Alan Hill |
|---|---|
| Astillero | Marcon |
| Lugar | Falmouth |
| Capacidad de carburante | 60.0 ltr (13.2 G) Total - 1 Tanks |
| Capacidad de agua | 100.0 ltr (22.0 G) Total - 1 Tanks |
Sistemas Mecánicos
| Motor | 1 x gasoil 20cv |
|---|---|
| Marca del motor y el modelo | Volvo Penta MD2B () |
| Horas de motor | Desconocido |
| Motor refrigerado por | Direct |
| Gobierno | caña |
| Propulsión | Eje/s |
| Helice(s) | 2 blade |
| Consumo de carburante | 1.0 ltr (0.2 G) /hora A velocidad de crucero |
| Velocidad de crucero | 5 nudos |
| Velocidad máxima | 6 nudos |
Engine had injectors removed and serviced 2011
Oil and Filters replaced yearly
Adverc battery charging system
Replaced alternator 2010
120 Ah domestic + 80 Ah starter. New OFF-1-2-BOTH switch.
Dimensiones
| Eslora total | 8.23m |
|---|---|
| Eslora de flotación | 6.75m |
| Manga | 2.80m |
| Calado mín. | 0.91m |
| Calado máx. | 0.91m |
| Desplazamiento | 3,258kg (7,183.9lbs) |
| Altura interior | 1.80m |
| Ubicación/Lugar | A tierra |
Jarcia
sloop aparejado Aluminio perchas (1970) con Inoxidable jarcia fija ()
Velas
| Rizas de mayor | - sables (2007) |
|---|---|
| Génova | - Enrollador () |
| Tangón de spi |
|---|
Genoa – sacrificial strip replaced 2011.
Kemp Mainsail – Performance Cruise – new in 2010 – very few hours of usage.
Spinnaker gear but no spinnaker
Sistemas eléctricos
12 batería de voltios, 2 Carga de baterías por: motor
Construcción
| Construction | Fibra |
|---|---|
| Perfíl de carena | Orza |
| Acabado | Gelcoat acabado |
Stainless steel pushpit mounted C-Chef barbecue (takes standard disposable barbecues).
¾ Marine Ply Storage locker for two gas cylinders behind tiller, top forms seat.
Primary winches changed for new Harken self-tailing winches.
Two bronze Harken snubbing winches installed for spinnaker handling.
Locker lids replaced and hinged, rather than loose.
New dodgers, with boat’s name.
Kemp boom with internal slab reefing lines.
Harken self tailing winch for reefing lines and main halyard.
New high capacity manual Whale Bilge Pump fitted in cockpit taking water from new strum box in bilge.
Interiores
| Total # de literas | 6 |
|---|---|
| No. de literas dobles | 2 |
| No. de literas únicas | 2 |
| Camarote(s) | 2 |
| Lavabos | 1 |
| Baño | 1 Baño (Manual) |
New stainless steel, gimballed two burner + oven cooker.
Iroko worktop.
Iroko sink cover doubles as cutting board.
New deep stainless steel sink with new bronze through hull drain cock.
New tap fed by new Whale diaphragm pump from new 75 litre flexible tank in forward cabin.
New keyless filler cap fitted on deck for fresh water.
New heavily insulated Chest Refrigerator with compressor below sink.
2 Fogone(s)/placa(s) gas Fogón detalle
Interiores
| Fogón detalle | |
|---|---|
| Parrilla | |
| Horno | |
| Fregadero/Lavabo | |
| Nevera | |
| Cortinas | |
| Calefacción | |
| Sistema de agua manual | |
| No fumadores |
New stainless steel, gimballed two burner + oven cooker.
Iroko worktop.
Iroko sink cover doubles as cutting board.
New deep stainless steel sink with new bronze through hull drain cock.
New tap fed by new Whale diaphragm pump from new 75 litre flexible tank in forward cabin.
New keyless filler cap fitted on deck for fresh water.
New heavily insulated Chest Refrigerator with compressor below sink.
2 Fogone(s)/placa(s) gas Fogón detalle
Equipo de cubierta
| Fundas de vela | |
|---|---|
| Capota anti rociones | |
| Laterales anti rociones | |
| Cabos | |
| Defensas | |
| Bichero | |
| Pescantes | |
| Tapas de instrumentos |
2 winches de driza
2 winches de escota
Eléctrico molinete
3 Anclas
(Plough, Fishermans, Danforth)
30.00m de cadena
The rudder on Sabres are known to often have a problem such that there are mild steel tangs welded to the stainless rudder shaft – all of which is embedded within the rudder in foam and always wet or at least damp; the welds (between dissimilar metals) suffer from corrosion and are prone to break. Such a failure whilst sailing could lead to a very serious incident.
The rudder on this boat was split open last winter (2011-2012), the mild steel tangs were removed and replaced by stainless steel ones by a local marine welder. The rudder was epoxied back together and finally a layer of glass cloth epoxied onto the whole rudder.
Equipo de navegación
| Compás | |
|---|---|
| Corredera | |
| Corredera | |
| Anemómetro | |
| VHF | |
| GPS | |
| Sonda |
GPS can be connected to laptop to create a plotter, cards and software will be included if required
Plastimo Contest Compass, NASA Clipper Depth, GPS repeater, Wind, Log all new within last three years. Furuno GPS, ICom transceiver.
Comentario del broker
A sabre 27 in generally good condition overall with room for improvement, engine is original but runs like a champ, hull looks good with a couple of small gelcoat repairs, top sides about the same as the hull.
Interior wise its time to get the sewing machine out, knock up a few covers and the boat will be transformed. There are a couple of bits of headlining to replace and thats about it. Sails are good and usable and everything works apparently.
These boats are a great family starter for not much money and pretty capable. Owner retiring from sailing hence the sale.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.