Ribeye TA365
- Barco REF# · 157305
- Eslora total · 3.65m
- Año · 2012
- Construcción · Aluminio
- Perfíl de carena · Planeo
- Motor · 1 x gasolina 30cv, Yamaha (2012)
- Lugar · South Devon
Este barco está fuera del mercado Aqui hay algunas embarcaciones que siguen en venta
Detalles suplementarios
Astillero | Ribeye Ltd |
---|---|
Lugar | South Devon |
Capacidad de carburante | 30.0 ltr (6.6 G) Total - 1 Tanks |
Sistemas Mecánicos
Motor | 1 x gasolina 30cv |
---|---|
Marca del motor y el modelo | Yamaha (2012) |
Horas de motor |
motor1= 10 |
Motor refrigerado por | Direct |
Gobierno | rueda |
Propulsión | fueraborda |
Helice(s) | 3 bladed |
Consumo de carburante | Desconocido |
Velocidad de crucero | 15 nudos |
Velocidad máxima | 25 nudos |
Stainless steel built in fuel tank
Electric (auto) bilge pump
Plug in nav light
Dimensiones
Eslora total | 3.65m |
---|---|
Manga | 1.65m |
Calado mín. | 0.20m |
Calado máx. | 0.30m |
Desplazamiento | 108kg (238.1lbs) |
Ubicación/Lugar | Seque almacenamiento |
Sistemas eléctricos
12 batería de voltios, 1 Carga de baterías por: motor
Construcción
Construction | Aluminio |
---|---|
Perfíl de carena | Planeo |
Acabado | Bi- componente |
Hypatex 2-tone white and light grey tubes with 4 grab handles and 4 fabric handles , white epoxy powder coated heavy-duty aluminium hull and deck, heavy duty keel guard, large diameter multi compartment buoyancy tubes, recessed inflation valves, heavy duty rubbing strake.
Anti-slip decktread, raised anchor locker with access hatch and anchor eye, 4 inside grab handles, transom drain, 4 davit lifting points, mooring cleat, single fixing point on bow, towing point
Reinforced transom to support up to 70hp outboard motor
Boat displacement figure shown is boat only weight
RCD Cat C, 5 persons
Equipo de navegación
Luces de navegación |
---|
Equipo de seguridad
1 Bombas de achique (0 manual / 1 eléctrico)
Comentario del broker
Provisional details awaiting approval
Boatshed Dartmouth are delighted to offer for sale a lightly used Ribeye TA365. What especially singles out these Ribeye Tenders, with their white aluminium hulls, is their ideal suitability for beaching roles, typical for long-term tender use. Such smaller boats are much more likely to be dragged onto beaches or slipways where gravel, shingle and hard surfaces can be less than friendly to GRP hulls, which can be prone to deep scratching and the wear and tear of frequent abrasion. Aluminium hulls will take the punishment year after year. The TA series hulls (‘All Aluminium’) have heavy duty aluminium hulls. These Ribeye aluminium tenders are roomy, strong and robust, yet light and easy to transport. This TA365 is fitted with the centre console and also features davit lifting eyes.
Appointments to view can be booked in advance 6-days a week directly with Paul Singer your Boatshed Dartmouth broker.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.