Mason 33 Offshore Cutter

Equipped for Blue Water!
US$79,500.00 (Approx £61,230.15)
  • Boat REF#  ·  262542
  • Length  ·  10.06m
  • Year  ·  1986
  • Construction  ·  GRP
  • Underwater profile  ·  Long Keel
  • Sleeping berths  ·  6
  • Engine  ·  1 x diesel 27hp, Yanmar Model 3GM (2003)
  • Lying  ·  Puget Sound, WA USA - Shown by Appointment
Boatshed Seattle
Boatshed Seattle
Dave Carleson

Extra Details

Designer Al Mason
Builder Ta Shing
Lying Puget Sound, WA USA - Shown by Appointment
Fuel capacity 136.4 ltr (30.0 USG) Total - 1 Tanks
Water capacity 363.6 ltr (80.0 USG) Total - 3 Tanks
Holding tank capacity 90.9 ltr (20.0 USG) Total - 1 Tanks
Last survey 11/04/2011

Mechanical

Engine 1 x diesel 27hp
Engine make and model Yanmar Model 3GM (2003)
Engine Hours Engine1: 90
Engine Cooled Indirect
Steering Wheel
Drive Shaft
Prop(s) Campbell Sailor, three blade
Fuel consumption (approx) 1.9 ltr (0.4 USG) /hour At Cruising Speed
Cruising speed (approx) 6 knots
Max speed (approx) 6 knots

Engine hours are "since rebuild" -- a thorough professional rebuild in 2018

The Propeller new in 2010
PYI Dripless Shaft Log New in 2012
All Thru-hulls are Ball Valve Bronze

Additional Electrical Details
There are four house batteries and one start battery
The house batteries are 6V AGM and the start battery is 12 V AGM

The shore power charger is Xantex TruCharge 2-20 amp 2010

Battery Monitor Xantex Link 10 for the house and and digital voltmeter for the start battery

Solar Panels are two Shell Solar SQ 80P 85 Watt
and two Kyocera 65 Watt for a total of 300 Watt Total
Solar Charger Controller: Trace C40

Wind Generator: KISS

Dimensions

Length 10.06m
LOD 10.29m
LWL 7.75m
Beam 3.30m
Draft Min 1.52m
Draft Max 1.52m
Airdraft 14.63m
Displacement 6,350kg (14,002.4lbs)
Headroom 1.96m
Storage In water

Rig

Cutter rigged Aluminium spars (1986) with Stainless Steel standing rigging (2010)

Sails

Reefing mainsail Sailrite Kiit by seller - Slab (2014) 2 Reefs
Headsail Sailrite by sellere - Furling (unknown year)


The standing rigging wire is new 2012

All sails are in excellent condition. The inventory includes:
MainSail: Sailrite Kit by seller, 2014 with two rows of slab reef points
120 Genoa; Neil Pryde Sails 2002 re-worked 2017
Staysail: Port Townsend Sails converted to roller furling 2014
Trysail: Port Townsend Sails on a separate mast track with ready bag
Yankee: Original but re-worked 2003 and used as a spare

Pro Furl NC 42 for Genoa and Pro Furl 32 for the staysail, control line replaced 2011
Whisker Pole: forespar, adjustable on track with Spinlok control clutches
Sail Covers: Captain Navy Sunbrella
Standing Rigging: Sta-Lok terminals were serviced 2015 with 1X19 cable new in 2012
Running Rigging: Double Braid Dacron
Running Back Stays: 1X19 SS wire rope with Harken fiddle blocks and cockpit control lines

The mast is keel stepped

Electrical Systems

12 volt, 5 batteries charged by: engine, wind generator, solar panels, shore power

Construction

Construction GRP
Underwater profile Long Keel
Finish Gelcoat finish

LOA 33' 9' LWL 25' 5" BEAM 10' 10" DRAFT 5' DISPLACEMENT 14,000 lbs BALLAST 5,320lbs. SAIL AREA 602ft^2

Last surveyed 2011

The fuel tanks are aluminum and were installed as new in 1999 and last cleaned in 2017.

The two water tanks are stainless steel with inspection ports. There is one additional 15 gallon bladder tank. The 6 gallon hot water is heated by shore power and engine while under way.

The holding tank is FRP and has a deck outlet or overboard. The hot water tank is 6 gallons and heated by the engine and A/C.

The hull below the waterline is epoxy barrier coated. And the topsides have Awlgrip paint which was applied 2015.

Though the keel is noted as full keel in fact it is a full keel with cutaway fore foot.

Waterline Boats / Boatshed does not independently verify capacities and measures, which are reported from seller-provided information and/or literature.

Accommodation

Total # of berths 6
No. of double berths 3
Cabin(s) 2
Sink 1
Shower 1
Heads 1 heads (Manual)

This narrative of the interior can be supplemented by a review of photos, the video and the 360 virtual tour.

Starting from the cockpit and entering the companionway and descending four steps you are now down below. One of the first things to notice is the generous use of beautiful teak in the sole, cabinets, tables, bulkheads etc. To starboard is the U-shaped galley with lots of counter space with cabinets above and storage below.

The galley features a double SS deep sink, Technautic 12V refrigerator and freezer and a propane Hillerange 2 burner stove with oven that was new in 2014. There is both fresh water and salt water foot pumps in both the galley and the head as well as the pressure water system. The U-shape lends itself for cooking while underway, plenty of comfortable spaces to “lean in.” To port is an aft-facing complete navigation area. Forward are port and starboard settees with dining table with drop leaf. On the forward bulkhead is the diesel cabin heater. Of note is the keel-stepped mast. Further forward to port is the head with shower, wash basin, mirror and manual toilet. Forward through the salon door is a very spacious forward cabin with anchor locker, hanging locker, small counter, overhead hatch providing light, ventilation and emergency escape, and teak-faced lockers. This large sized forward cabin is unique for a vessel of this size. Throughout the cabins there is plenty of light and ventilation provided by overhead hatches and opening side ports as well as dorade vents.

Water Maker: Katadyn Power Survivor 40E mounted under the galley sink needs to be serviced. The 6 gallon hot water is by engine cooling or shore power.

Cabin heat is provided by a Balmar diesel heater.

2 burner propane Stove

Accommodation

Stove
Sink
Fridge
Freezer
Drapes
Cabin heating
Manual water system
Pressurised water system
Hot water system
Raw water wash
Non-Smokers

This narrative of the interior can be supplemented by a review of photos, the video and the 360 virtual tour.

Starting from the cockpit and entering the companionway and descending four steps you are now down below. One of the first things to notice is the generous use of beautiful teak in the sole, cabinets, tables, bulkheads etc. To starboard is the U-shaped galley with lots of counter space with cabinets above and storage below.

The galley features a double SS deep sink, Technautic 12V refrigerator and freezer and a propane Hillerange 2 burner stove with oven that was new in 2014. There is both fresh water and salt water foot pumps in both the galley and the head as well as the pressure water system. The U-shape lends itself for cooking while underway, plenty of comfortable spaces to “lean in.” To port is an aft-facing complete navigation area. Forward are port and starboard settees with dining table with drop leaf. On the forward bulkhead is the diesel cabin heater. Of note is the keel-stepped mast. Further forward to port is the head with shower, wash basin, mirror and manual toilet. Forward through the salon door is a very spacious forward cabin with anchor locker, hanging locker, small counter, overhead hatch providing light, ventilation and emergency escape, and teak-faced lockers. This large sized forward cabin is unique for a vessel of this size. Throughout the cabins there is plenty of light and ventilation provided by overhead hatches and opening side ports as well as dorade vents.

Water Maker: Katadyn Power Survivor 40E mounted under the galley sink needs to be serviced. The 6 gallon hot water is by engine cooling or shore power.

Cabin heat is provided by a Balmar diesel heater.

2 burner propane Stove

Deck Gear

Sail cover
Sprayhood
Spray dodgers
Cockpit cover
Bimini
Rode
Fenders
Boathook
Swim Ladder
Instrument Covers
Cockpit Enclosure
Bimini

3 halyard winches
4 sheet winches
Manual RC Plath windlass
3 anchors
(Rocna-CQR-Fortress)
94.49m of chain
Custom dinghy (unknown year)
(Hard Dinghy)
#22kg Rocna Spade anchor with 310' of 5/16" High Test Galvanized chain.
#44 CQR with 220' of 5/16" Galvanized Chain and 150' 3/4" three strand nylon rode.
#25 Danforth with 30' 5/16" chain and 250' of nylon three strand.
#27 Fortress F-27
Double bow anchor rollers with anchors ready to deploy
Winch inventory: At the Mast, Lewmar 30ST 2 speed (2) and Lewmar 24 2 speed (1)

In the Cockpit: All Lewmar 2- 40ST 2 speed, 1- 24 2 speed 1-16 2 speed

Line control: SpinLok rope clutches 3 with double stops

Nav Equipment

Compass
Speed
Log
Wind
Radar
VHF
SSB
SSB Modem
Chart plotter
Autopilot
Stereo
Clock
Barometer
Navigation lights
Fish Finder
AIS Receiver
Depth sounder
Radar Reflector

GPS Garmin 128
Radar Furuno 1715 24 nm
AIS NASA Receiver/Display with 32 nm dedicated antenna
SSB Radio Icom IC-M710-2RT
SGC Digital Noise Reduction Speaker
9 db High Gain wifi antenna
VHF Icom IC-M402 with remote microphone
VHF Hand Held Icom IC-M32
Compass Ritchie 5" with red light
Masthead Tri color, anchor, steaming
Fathometer three separate systems: Standard Horizon, Raymarine Digital, Garmin
Wind Indicator Windex
Anemometer Standard Horizon Digital
Auto Pilot Simrad TP 10

Safety Equipment

Life jackets
Searchlight
Safety harnesses
EPIRB 406MHz
Emergency steering

2 bilge pumps (0 manual / 2 electric)

Fire safety is provided by a fire blanket attached under hanging cabinet in the galley. There are also 3 BC type fire extinguishers.
Other safety equipment includes; lifesling rail mounted on the stern, one type 1 life ring, jack lines run the length of the deck, double stainless 1X19 wire with 2011 lifeline netting, high water alarm, man overboard pole with strobe light.

Broker's Comments

VIRTUAL TOUR - VIDEO - 80 TO 100 PHOTOS - FULL SPECS CAN BE VIEWED OF THIS VESSEL!
The sellers of this fine vessel have recently completed 14 years and 32 days of continuous travel in the Pacific Ocean, and safely traveled in excess of 41,000 miles. This vessel has been continually maintained in top condition with equipment replaced and upgraded as needed. Upon a visit it is readily apparent that this is truly a remarkable offering. This boat asks to “take me back out to sea, I’m ready to go!”

This Mason 33 was designed and built specifically for this type of adventure. Upon being introduced to this Mason, I was impressed the overall beauty of the lines. Then on closer inspection, to the attention to detail and the serious off- shore rigging and equipment. I can see why the sellers had such safe, enjoyable voyages. Starting with the double anchors on double rollers at the stem head, then the headsail and staysail on roller furlings, the nesting dinghy, the ample number of winches, and so on... When I got to the cockpit with the serious dodger, solar panels, hard top, wind vane steering, wind generator, heavy-duty stainless steel railings it became apparent that this is in fact a comfortable sea going vessel.

This is truly a unique opportunity.

These boat details are subject to contract.
Note: Offers on the asking price may be considered.

This Mason 33 Offshore Cutter has been personally photographed and viewed by David Carleson of Boatshed Seattle. Click here for contact details.
The particulars herein are intended to give a fair description of the vessel but are not guaranteed as accurate. They shall not form part of any offer or contract for the sale of the vessel. The prospective purchaser is recommended to independently check the particulars. The vendor is not selling in the course of a business unless otherwise stated. Personal property is excluded from the sale of the vessel unless specifically included in the listing specifications above or in a Purchase Contract. Personal property may be equipment or gear not permanently attached to the vessel including but not limited to: artwork, entertainment equipment, fishing equipment, TV receivers, recreational equipment, kayaks, tools, and personal appliances. Photos that may incidentally depict owners' personal property do not convey that such items are included in the sale of the vessel unless specifically listed herein.

Comments 0

Please note this comments section is public. Please do not post your personal details here. To enquire about purchasing this boat, please contact the broker directly at davecarleson@boatshedseattle.com Please read our commenting guidelines before posting.

Be the first to leave a comment or ask a question...
You must be logged in to leave a comment.
Login or register for free